สืบค้นงานวิจัย
เซลล์ไฟฟ้าเคมีสำหรับอุตสาหกรรมฟอกย้อมเพื่อการใช้น้ำซ้ำ
พัชรินทร์ สุดปฐม - มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ
ชื่อเรื่อง: เซลล์ไฟฟ้าเคมีสำหรับอุตสาหกรรมฟอกย้อมเพื่อการใช้น้ำซ้ำ
ชื่อเรื่อง (EN): Electrocoagulation treatment of textile wastewater for water reuse
ผู้แต่ง / หัวหน้าโครงการ: พัชรินทร์ สุดปฐม
บทคัดย่อ: งานวิจัยนี้ศึกษาศักยภาพของเซลล์ไฟฟ้าเคมีในการบำบัดน้ำเสียสีย้อมจากอุตสาหกรรม ฟอกย้อม ขั้วเหล็กและขั้วอะลูมิเนียมถูกใช้เป็นอิเล็กโทรดที่สลายตัว ขณะที่ขั้วไทเทเนียมเคลือบด้วยรูทิเนียมออกไซด์ถูกใช้เป็นอิเล็กโทรดไม่สลายตัว ผลการทดลองที่ใช้ขั้วเหล็กและขั้วอะลูมิเนียม ที่ความหนาแน่นกระแส 30-50 แอมแปร์ต่อตารางเมตร ระยะเวลาสัมผัสขั้ว 10-15 นาที สามารถกำจัดสีประเภทไดเร็กส์และดิสเพอร์สได้เกือบสมบูรณ์ อย่างไรก็ตามค่าซีโอดีที่เกิดจากสารอนินทรีย์ยังคงมีค่าสูงอยู่ จึงต้องทำการศึกษาการลดค่าการนำไฟฟ้าและค่าความกระด้างต่อไป นอกจากนี้พบว่า เซลล์ไฟฟ้าเคมีที่ใช้ขั้วเหล็กเป็นอิเล็กโทรดให้ประสิทธิภาพที่ดีกว่าการใช้ขั้วไทเทเนียม เหตุผลเนื่องมาจากความเป็นกรด-ด่างของกระบวนการที่ใช้ขั้วเหล็กอยู่ในช่วง 7-9 ซึ่งเหมาะสมสำหรับ การตกตะกอนในรูปสารประกอบเหล็กไฮดรอกไซด์ แคลเซียมคาร์บอเนตและแมกนีเซียมไฮดรอกไซด์ ในทางตรงกันข้ามเทคนิคเซลล์ไฟฟ้าเคมีแบบออกซิเดชันทำให้ค่าความเป็นกรด-ด่างลดลง ในบางตัวอย่างที่มีความกระด้างน้อยกว่า 2000 ppm เมื่อผ่านกระบวนการเซลล์ไฟฟ้าเคมีที่ใช้ขั้วเหล็ก น้ำที่ผ่านการบำบัดสามารถป้อนเข้าสู่ระบบออสโมซีสผันกลับ โดยโปรแกรม ROSA ทำนายคุณภาพของน้ำหลังการบำบัดว่าอยู่ในระดับที่สามารถนำกลับมาใช้ซ้ำหรือนำกลับมาใช้ใหม่ได้
บทคัดย่อ (EN): In this study, the potential of the electrochemical treatment processes in treating real textile wastewater was evaluated. Both iron (Fe) and aluminum (Al) were used as the sacrificial anodes in the electrocoagulation, while titanium coated with RuO2 was used as the dimensionally stable anode (DSA) in the electrochemical oxidation. Using either Fe or Al and a current density between 30-50 A/m2 and an electrocoagulation time between 10-15 min can remove both direct and disperse dyes from water almost completely. However, the chemical oxygen demand (COD) associated with inorganic substances was still high, and the reduction of water conductivity, and hardness was further investigated. The electrocoagulation using iron anode was found to be more suitable than the electrochemical oxidation using the DSA. This is because the water pH during the electrocoagulation was in the basic region suitable (pH7-9) for the precipitations of iron hydroxide complexes, calcium carbonate and magnesium hydroxide. In contrast, the electrochemical oxidation decreased the water pH to an acidic region. In some samples in which the starting calcium and magnesium content was lower than 2000 ppm, the electrocoagulation can reduce water hardness substantially such that the water became suitable for a reverse osmosis (RO) treatment. It was predicted by the ROSA program that the water property after the RO treatment was good enough for water reuse and recycling.
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): th
เผยแพร่โดย: มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ
คำสำคัญ: การกำจัดของเสีย
เจ้าของลิขสิทธิ์: มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ
รายละเอียด: In this study, the potential of the electrochemical treatment processes in treating real textile wastewater was evaluated. Both iron (Fe) and aluminum (Al) were used as the sacrificial anodes in the electrocoagulation, while titanium coated with RuO2 was used as the dimensionally stable anode (DSA) in the electrochemical oxidation. Using either Fe or Al and a current density between 30-50 A/m2 and an electrocoagulation time between 10-15 min can remove both direct and disperse dyes from water almost completely. However, the chemical oxygen demand (COD) associated with inorganic substances was still high, and the reduction of water conductivity, and hardness was further investigated. The electrocoagulation using iron anode was found to be more suitable than the electrochemical oxidation using the DSA. This is because the water pH during the electrocoagulation was in the basic region suitable (pH7-9) for the precipitations of iron hydroxide complexes, calcium carbonate and magnesium hydroxide. In contrast, the electrochemical oxidation decreased the water pH to an acidic region. In some samples in which the starting calcium and magnesium content was lower than 2000 ppm, the electrocoagulation can reduce water hardness substantially such that the water became suitable for a reverse osmosis (RO) treatment. It was predicted by the ROSA program that the water property after the RO treatment was good enough for water reuse and recycling.
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
เซลล์ไฟฟ้าเคมีสำหรับอุตสาหกรรมฟอกย้อมเพื่อการใช้น้ำซ้ำ
มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าพระนครเหนือ
2555
ความต้องการใช้น้ำเพื่อการอุตสาหกรรมในนิคมอุตสาหกรรมแหลมฉบัง การพัฒนาเพียโซอิเล็กทริกคอมโพสิตเพื่อใช้เป็นแหล่งกำลังไฟฟ้า การปลี่ยนแปลงทางกายวิภาคและทางเคมีของเปลือกมังคุดภายหลังการกดทับ การบำบัดสีในน้ำสีรีแอกทีฟจากโรงงานฟอกย้อมโดยกระบวนการไฟฟ้าเคมี การย้อมเซลล์ประสาทด้วยสีจากธรรมชาติ การใช้ดัชนีชีวภาพและดัชนีเคมีเพื่อประเมินผลกระทบจากมนุษย์ต่อคุณภาพน้ำของแม่น้ำปาย จังหวัดแม่ฮ่องสอน อิทธิพลของสนามไฟฟ้าต่อการวางตัวของเซลล์ยีสต์ขณะแตกหน่อ การถ่ายทอดเทคโนโลยีของบริษัทข้ามชาติ ให้แก่วิศวะกรไทยในโรงงานอุตสาหกรรมปิโตรเคมีและเคมีในนิคมอุตสาหกรรมมาบตาพุด จังหวัดระยอง การพัฒนาไบโอแอสเสย์แบบเคมีไฟฟ้าโดยใช้ไส้ดินสอเป็นขั้วไฟฟ้าทำงานหาปริมาณสารบ่งชี้ทางชีวภาพบางชนิด การบำบัดน้ำเสียจากอุตสาหกรรมผลิตสีย้อมและการย่อยสลายสีย้อมกลุ่มอะโซบางชนิดโดยจุลินทรีย์ผสม
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก