สืบค้นงานวิจัย
การปรับเสถียรภาพ/การทำก้อนแข็งของตะกอนจากกระบวนการฟอกโครมโดยใช้ซีเมนต์และเถ้าแกลบ
Chaiwat Rungsipanodorn - มหาวิทยาลัยมหิดล
ชื่อเรื่อง: การปรับเสถียรภาพ/การทำก้อนแข็งของตะกอนจากกระบวนการฟอกโครมโดยใช้ซีเมนต์และเถ้าแกลบ
ชื่อเรื่อง (EN): Stabilization/solidification of chrome-tanning sludge using cement and rice husk ash
ผู้แต่ง / หัวหน้าโครงการ (EN): Chaiwat Rungsipanodorn
บทคัดย่อ: {0.281 x สัดส่วน}, R2 = 0.845 109 ห
บทคัดย่อ (EN): This study aimed to find the optimum conditions in the process for the stabilization/solidification of chrome-tanning sludge by using cement and rice husk ash. In so doing, it determined the best ratio for mixing cement, rice husk ash, and tannery sludge by considering compressive strength, the leachability of chromium, and economic factors. There were 16 sets of tests, with each differing with respect to the mixture ratio of rice husk ash (RHA) to cement and that the ratio of tannery sludge to cement. These ratios were assigned to be 25%, 50%, 75% and 100%, respectively. With each of these mixtures, the specimens were cured for different periods, namely 1, 7, 14, and 28 days. Tannery sludge was collected and analyzed for chromium content, which was about 473 gCr./kg of dried sludge, while the leachability of chromium was about 197.5 mg/L compared with the disposal standard of 5 mg/L. The ratio of rice husk ash to cement and tannery sludge to cement as well as curing time all affected compressive strength and chromium leachability. Compressive strength increased as the curing time increased (P-value<0.05). However, chromium leachability decreased as the curing time was prolonged in all groups (P-value<0.05). Increasing the ratio of tannery sludge led to lower compressive strength and higher chromium leachability. In contrast, increasing the ratio of rice husk ash resulted in significantly lower compressive strength and chromium leachability (P-value<0.05). The optimum conditions in the process of stabilizing chrome-tanning sludge was at the mixture ratio (cement : rice husk ash : sludge) of 1 : 0.5 : 1 with the curing time of 28 days. The water requirement for mixing was about 280 liter per 1000 kg dried sludge, and the cost of the treatment was 3,150 Baht/ton dried sludge. It is concluded that the applicability of solidified sludge for use as construction material is needed feasible by creating a contour diagram of compressive strength and leachability of chromium or by using a mathematical model that can be applied for mixtures of all ratios. The regression model with an RHA constant of 25% is summarized as follows: Compressive strength (ksc) = 295.634+{3.185 x curing time}- {37.187 x ratio}, R2 = 0.852 Leachability of Cr. (mg/L) = 4.023-{0.162 x curing time}+{0.281 x ratio}, R2 = 0.845
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): th
เอกสารแนบ: http://dcms.thailis.or.th/dcms/dccheck.php?Int_code=126&RecId=1105&obj_id=630
เผยแพร่โดย: มหาวิทยาลัยมหิดล
คำสำคัญ (EN): Stabilization
เจ้าของลิขสิทธิ์: มหาวิทยาลัยมหิดล
รายละเอียด: {0.281 x สัดส่วน}, R2 = 0.845 109 ห
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
การปรับเสถียรภาพ/การทำก้อนแข็งของตะกอนจากกระบวนการฟอกโครมโดยใช้ซีเมนต์และเถ้าแกลบ
Chaiwat Rungsipanodorn
มหาวิทยาลัยมหิดล
2546
บล็อกซีเมนต์ประสานที่ใช้เถ้าแกลบดำ เถ้าแกลบขาว หรือเถ้าชานอ้อยเป็นส่วนผสม สมบัติของก้อนหล่อแข็งกากตะกอนโลหะหนักที่ใช้ปูนซีเมนต์ปอร์ตแลนด์และเถ้าแกลบดำเป็นวัสดุยึดประสาน การรั่วไหลของโลหะหนักจากก้อนหล่อแข็งของเสียที่เตรียมโดยการกระตุ้นเถ้าแกลบด้วยด่าง การหล่อแข็งกากตะกอนตะกั่วโดยใช้ปูนซีเมนต์ขี้เถ้าแกลบและขี้เถ้าลอย กำลังรับแรงอัดอัดของก้อนของเสียหล่อแข็งกากตะกอนจากโรงชุบที่ใช้กากแคลเซียมคาร์ไบด์และเถ้าแกลบดำเป็นวัสดุยึดประสาน และใช้ปูนซีเมนต์ และโซเดียมซิลิเกตในการกระตุ้นปฎิกิริยาปอซโซลาน การใช้ประโยชน์จากเถ้ากะลาปาล์มในการบำบัดโครเมียมในฝุ่นสีด้วยวิธีการปรับเสถียรและการทำให้เป็นก้อน อิทธิพลของชนิของสารกระตุ้นประเภทด่างที่มีต่อกำลังรับแรงอัดของก้อนของเสียหล่อแข็งกากตะกอนจากโรงชุบที่ใช้กากแคลเซียลคาร์ไบด์และเถ้าแกลบดำเป็นวัสดุประสาน การศึกษาตัวแปรที่มีอิทธิพลต่อคุณสมบัติของอิฐซีเมนต์ผสมเถ้าแกลบขาวและเยื่อกระดาษ การใช้ประโยชน์จากกากตะกอนน้ำเสียโรงงานฟอกย้อมในการผลิตปุ๋ย การศึกษาคุณสมบัติซีเมนต์ผสมขี้เถ้าแกลบ
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก