สืบค้นงานวิจัย
การประยุกต์ใช้พอลิเมอร์ลอกแบบโมเลกุลและพัฒนาวิธีระบบไมโครโฟลอินเจคชันอะนาลิซีสสำหรับตรวจหาปริมาณฟอสเฟตตกค้างในน้ำยางพารา
วิษณุ ธงไชย - สำนักงานคณะกรรมการส่งเสริมวิทยาศาสตร์ วิจัยและนวัตกรรม (สกสว.)
ชื่อเรื่อง: การประยุกต์ใช้พอลิเมอร์ลอกแบบโมเลกุลและพัฒนาวิธีระบบไมโครโฟลอินเจคชันอะนาลิซีสสำหรับตรวจหาปริมาณฟอสเฟตตกค้างในน้ำยางพารา
ชื่อเรื่อง (EN): Application of molecularly imprinted polymer and development of micro-flow injection analysis system for the determination of residual phosphate in rubber
ผู้แต่ง / หัวหน้าโครงการ: วิษณุ ธงไชย
บทคัดย่อ: บทคัดย่ออยู่ที่ไฟล์แนบ
บทคัดย่อ (EN): This work presents the application of molecularly imprinted polymer (MIP) and development of micro-flow injection analysis system for the determination of residual phosphate in rubber. The molecularly imprinted polymer was prepared by using biphenyl phosphate as the template molecule. The sample was first pre-concentrated on the MIP. When the sample containing phosphate was introduced into the micro-flow injection device it was UV detected at 890 nm by an enhancement effect on the reaction of ascorbic acid method. Optimum combined reagents for the ascorbic acid method were 2.0 M sulfuric acid, 0.01 M Potassium antimony tartrate, 3% ammonium molybdate and 0.1 M ascorbic acid. The sample preparation of concentrated latex for soluble phosphate included latex coagulation by ethanol and acetone. Under an optimum condition, a calibration curve was linear over the concentration ranged from 0.1-1.0 mg/l. The detection limit (3?) and the quantitation limit (10?) were found to be 0.09 mg/l and 0.29 mg/l respectively. The mean percentage recoveries of soluble phosphate for concentrated latex were in the good range of 83.44-107.02 % and the relative standard deviations (RSD) less than 5%. The developed molecularly imprinted polymer and micro-flow injection analysis system has been successfully applied in latex with an acceptable recovery. The proposed method could be able to use as an alternative method to conventional procedure for quality control in latex industry.
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): th
เอกสารแนบ: https://elibrary.trf.or.th/project_content.asp?PJID=RDG5650069
เผยแพร่โดย: สำนักงานคณะกรรมการส่งเสริมวิทยาศาสตร์ วิจัยและนวัตกรรม (สกสว.)
คำสำคัญ: น้ำยางพารา
คำสำคัญ (EN): residual phosphate
หมวดหมู่:
หมวดหมู่ AGRIS:
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
การประยุกต์ใช้พอลิเมอร์ลอกแบบโมเลกุลและพัฒนาวิธีระบบไมโครโฟลอินเจคชันอะนาลิซีสสำหรับตรวจหาปริมาณฟอสเฟตตกค้างในน้ำยางพารา
วิษณุ ธงไชย
สำนักงานคณะกรรมการส่งเสริมวิทยาศาสตร์ วิจัยและนวัตกรรม (สกสว.)
2558
การใช้น้ำยางพาราพัฒนาสมบัติทางกายภาพและทางกลของคอนกรีตบล็อก การพัฒนาอุปกรณ์วิเคราะห์น้ำยางพาราสำหรับใช้งานในสวนยางพารา การศึกษาสมบัติของมอร์ต้าผสมน้ำยางพารา ผลของไคโตซานต่อระดับของโมเลกุลส่งสัญญาณ (SA; JA และ ABA) และการแสดงออกของ marker genes ในระบบป้องกันตนเองของยางพารา การพัฒนาอิฐดินซีเมนต์ผสมน้ำยางพารา: โครงการวิจัยขนาดเล็กการประยุกต์ใช้น้ำมันยางพาราในอุตสาหกรรมก่อสร้าง การพัฒนาวิธีโพเทนชิโอเมทรีสำหรับตรวจหาปริมาณฟอสเฟตในน้ำยาง การทำอาหารแร่ธาตุชนิดก้อนสำหรับเลี้ยงโค ผลการใช้เมล็ดฝ้ายทดแทนอาหารข้นสำหรับโคกำลังรีดนม การวิจัยและพัฒนาศักยภาพยางพาราสำหรับภาคตะวันออกเฉียงเหนือ การศึกษาเบื้องต้นการใช้ใบกระถินณรงค์เป็นอาหารเสริมสำหรับการเลี้ยงโค
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก