สืบค้นงานวิจัย
เคลือบเซรามิกส์จากเปลือกหอยนางรม
เสกสรรค์ ตันยาภิรมย์ - มหาวิทยาลัยบูรพา
ชื่อเรื่อง: เคลือบเซรามิกส์จากเปลือกหอยนางรม
ชื่อเรื่อง (EN): Ceramic Glaze from Oyster Shells
ผู้แต่ง / หัวหน้าโครงการ: เสกสรรค์ ตันยาภิรมย์
บทคัดย่อ: การวิจัยเคลือบเซรามิกส์จากเปลือกหอยนางรมนี้ เป็นการวิจัยเชิงการทดลอง เพื่อนำเปลือกหอยนางรมที่เป็นวัสดุเหลือทิ้ง และกองอยู่มากมายในเขตพื้นที่ตำบลแสนสุข และตำบลอ่างศิลา อำเภอเมืองจังหวัดชลบุรี มาทำเคลือบเซรามิกส์ โดยการทดลองออกเป็น 2 ส่วน คือ1. การหาอัตราส่วนที่เหมาะสมของเปลือกหอยนางรมกับวัตถุดิบอื่น เพื่อให้ได้หลักสูตรเคลือบพื้นฐานในการเผาที่อุณหภูมิ 1200-1300 องศาเซลเซียส ซึ่งการทดลองได้ดำเนินการ 3 ขั้นตอน โดยปรากฏผลการทดลองดังนี้ ขั้นตอนที่ 1 การทดลองผสมเคลือบด้วยวัตถุดิบ 2 ชนิด และ 4 ชนิด โดยอัตราส่วนที่เหมาะสมของเปลือกหอยนางรมที่ถือเป็นวัตถุดิบหลักนั้น คือ 10-40% แต่เคลือบมีความคงทนไฟสูงสุกตัวไม่ดีนัก ขั้นตอนที่ 2 ทดลองเคลือบด้วยเปลือกหอยนางรม 20/40% ร่วมกับวัตถุดิบอื่นที่ทำหน้าที่เป็นตัวหลอมละลายและทำให้เกิดความมันใสแวววาวในเคลือบ ซึ่งการศึกษาทดลองได้ทำการเผาที่อุณหภูมิ 1200 องศาเซลเซียส 1230 องศาเซลเซียส 1250 องศาเซลเซียส โดยกำหนดวัตถุดิบที่นำมาผสมและได้อัตราส่วนที่เหมาะสมดังนี้ เปลือกหอยนางรม 40%ดิน 5%Soda Feldspar 16-44%Zinc Oxide 6-11%Quartz 11-39% ขั้นตอนที่ 3 ทดลองเพื่อให้ได้สูตรเคลือบเปลือกหอยนางรมที่มีอัตราส่วนที่แน่นอน เพื่อนำไปเป็นสูตรเคลือบพื้นฐาน ซึ่งสูตรเคลือบเปลือกหอยนางรมนี้ มีการสุกตัวที่ดี ที่อุณหภูมิ 1230-1250 องศาเซลเซียส เคลือบมีผิวเรียบมัน โปร่งแสง ถึงกึ่งทึบแสง และปรากฏรอยรานในบางสูตร 2. การทดลองผสมสารให้สีและทึบในเคลือบ โดยนำเคลือบหอยนางรมสูตรพื้นฐานมาผสมสารให้สีและสารทำทึบ ทำให้ได้สูตรเคลือบสีต่างๆ ซึ่งสารที่นำมาผสมคือFerric Oxide ให้สีน้ำตาล ทดลองในปริมาณ 1-7%Copper Oxide ให้สีเขียว ทดลองในปริมาณ 1-7%Manganese Dioxide ให้สีน้ำตาลอมเทา ทดลองในปริมาณ 1-7%Titanium ให้ทึบ ทดลองในปริมาณ 1-4% เคลือบสีและเคลือบสีทึบที่ได้มีความสวยงามและมีสีสันที่แตกต่างหลากหลายขึ้นอยู่กับปริมารของสารให้สีและให้ทึบในเคลือบและความต่างกันของสูตรเคลือบพื้นฐาน ซึ่งในการผสมสารให้สีในปริมาณเกิน 5 % จะทำให้เคลือบทนไฟสูง และไม่สุกตัวตามอุณหภูมิที่กำหนดยกเว้น Ferric Oxide ซึ่งเป็นตัวหลอมละลาย ถ้าใส่ในปริมาณที่มากขึ้น
บทคัดย่อ (EN): A lot of oyster shells were trown away in piles whithin the areas of Tambon Saensuk and Tambon Ang Sila,Amphur Muang, Chouburi Province. This project deals with an experimental research on how to make use of these oster shells as glaze for ceramics. The research was carried out in 2 parts1. To find an appropriate proportion between the oyster shells and other materials in order to get basic glaze formulas fot firing at 1200?c, 1230?c, 1250?c and 1300?c respectively.Step 1 Try glaze mixture of 2 and 4 materials. The appropriate proportion of oyster shells which was the main material turned out to be 10-40%. However, the glaze was rather fireproof and did not give a good finish.Step 2 Try the proportion of 20-40% of oyster shells mixed with other materials in order to enchance to fusibilitiy as well as transparency and shininess of the glaze. The appropriate proportion of the glaze mixture out as below:Oyster Shells 40%Clay 5%Soda Feldspar 16-44%Zinc Oxide 6-11%Quartz 11-39%Step 3 Try to find exat proportions to establish oyster shell glaze formulas to be further used as basic glaze formulas. The glaze mixtures obtained from this research had their melting ponit beween 1230-1250?c. After the firing, the sample were convered with a smooth ans shiney glaze, transparent to opaque, with cracks in some formulas.2. To add colors and opacity to the glaze by mixing pigmentary and compacting agents into the basic glaze formulas. As a result, new formulas were obtained for color glazes. The coloring and compacting agents being used include:Ferric Oxide 1-7% - BrowCopper Oxide 1-7% - GreenManganese Dioxide 1-7% - Grayish brownTitanium 1-4% - Opaque The Color and opaque glazes obtained from this research were beautiful, with various nuances of colors, depending on the quantity of the coloring and compacting agents in the glaze mixture as well as the difference among the basic glaze fomulas. If more than 5% of coloring agents was used, the glaze became fireproof and it would not settle itself at a fiex temperature, except for Ferric Oxide, which would help enchance the fusibility itself if used in a greater quantity.
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): th
เอกสารแนบ: http://dcms.thailis.or.th/dcms/dccheck.php?Int_code=95&RecId=8942&obj_id=68656
เผยแพร่โดย: มหาวิทยาลัยบูรพา
คำสำคัญ: วิจัย
คำสำคัญ (EN): 738
เจ้าของลิขสิทธิ์: มหาวิทยาลัยบูรพา
รายละเอียด: A lot of oyster shells were trown away in piles whithin the areas of Tambon Saensuk and Tambon Ang Sila,Amphur Muang, Chouburi Province. This project deals with an experimental research on how to make use of these oster shells as glaze for ceramics. The research was carried out in 2 parts1. To find an appropriate proportion between the oyster shells and other materials in order to get basic glaze formulas fot firing at 1200?c, 1230?c, 1250?c and 1300?c respectively.Step 1 Try glaze mixture of 2 and 4 materials. The appropriate proportion of oyster shells which was the main material turned out to be 10-40%. However, the glaze was rather fireproof and did not give a good finish.Step 2 Try the proportion of 20-40% of oyster shells mixed with other materials in order to enchance to fusibilitiy as well as transparency and shininess of the glaze. The appropriate proportion of the glaze mixture out as below:Oyster Shells 40%Clay 5%Soda Feldspar 16-44%Zinc Oxide 6-11%Quartz 11-39%Step 3 Try to find exat proportions to establish oyster shell glaze formulas to be further used as basic glaze formulas. The glaze mixtures obtained from this research had their melting ponit beween 1230-1250?c. After the firing, the sample were convered with a smooth ans shiney glaze, transparent to opaque, with cracks in some formulas.2. To add colors and opacity to the glaze by mixing pigmentary and compacting agents into the basic glaze formulas. As a result, new formulas were obtained for color glazes. The coloring and compacting agents being used include:Ferric Oxide 1-7% - BrowCopper Oxide 1-7% - GreenManganese Dioxide 1-7% - Grayish brownTitanium 1-4% - Opaque The Color and opaque glazes obtained from this research were beautiful, with various nuances of colors, depending on the quantity of the coloring and compacting agents in the glaze mixture as well as the difference among the basic glaze fomulas. If more than 5% of coloring agents was used, the glaze became fireproof and it would not settle itself at a fiex temperature, except for Ferric Oxide, which would help enchance the fusibility itself if used in a greater quantity.
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
เคลือบเซรามิกส์จากเปลือกหอยนางรม
มหาวิทยาลัยบูรพา
2542
รายงานการวิจัยเรื่องการทดลองใช้เปลือกหอยนางรมเพื่อเป็นส่วนผสมในน้ำเคลือบเซรามิกส์ รายงายวิจัยการเลี้ยงหอยนางรมในจังหวัดสุราษฎร์ธานี รายงานการวิจัย ประสิทธิภาพของเชื้อราTrichoderma harzianum ในการควบคุมเชื้อรา Pythium SP สาเหตุโรคเน่าระดับดินของผักกาดเขียวกวางตุ้ง การสกัดสารคล้ายเพคตินและการทำให้บริสุทธิ์จากเปลือกผลไม้ไทย : รายงานวิจัย ฤทธิ์ทางชีวภาพของราเอนโดไฟท์ที่แยกได้จากป่าชายเลน : รายงานการวิจัย รายงานการวิจัยเรื่อง การศึกษาปัจจัยที่เหมาะสมต่อคุณภาพของซูริมิจากปลานิล รายงานวิจัยการผลิตผลิตภัณฑ์และผิวเคลือบวาวโลหะจากเหล็กออกไซด์ในดินพื้นบ้านจังหวัดสุราษฎร์ธานี รายงาน ผลงานวิจัยมหาวิทยาลัยแม่โจ้ เรื่องผลผลิตและคุณค่าทางอาหารของหญ้าเนเปียร์ที่ปลูกร่วมกับถั่วเซนโตร ผลของน้ำสกัดจากหอยสองฝาต่อการสร้างเทโทรโดทอกซิน และพิษอัมพาตจากหอยโดยแบคทีเรีย : รายงานผลการวิจัย รายงานการวิจัย อิทธิพลของน้ำสกัดชีวภาพจากหอยเชอรี่ต่อการเจริญเติบโตของผักกาดเขียวกวางตุ้ง
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก