สืบค้นงานวิจัย
การขจัดไอออนทองแดงออกจากน้ำเสียโดยการดูดซับบนถ่านกัมมันต์
กรรณิการ์ รักกิจ - จุฬาลงกรณ์มหาวิทยาลัย
ชื่อเรื่อง: การขจัดไอออนทองแดงออกจากน้ำเสียโดยการดูดซับบนถ่านกัมมันต์
ชื่อเรื่อง (EN): Removal of copper ions from wastewater by adsorption on activated carbon
ผู้แต่ง / หัวหน้าโครงการ: กรรณิการ์ รักกิจ
บทคัดย่อ: ศึกษาหาสภาวะที่เหมาะสมในการขจัดไอออนทองแดงออกจากน้ำเสียสังเคราะห์ และน้ำเสียจากโรงงานอุตสาหกรรม โดยใช้ถ่านกัมมันต์เกรดการค้า 4 ชนิดคือ ถ่านกัมมันต์ A B และ D ซึ่งถ่านกัมมันต์ทั้ง 4 ชนิดผลิตจากกะลามะพร้าว การทดลองแบ่งออกเป็น การศึกษาความสามารถในการดูดซับไอออนทองแดงบนถ่านกัมมันต์ทั้ง 4 ชนิด โดยมีตัวแปรที่ศึกษาคือ ค่าความเป็นกรดเบส เวลาสัมผัสและไอโซเทอมการดูดซับ ทดสอบประสิทธิภาพในการดูดซับไอออนทองแดงบนถ่านกัมมันต์ โดยใช้การทดลองแบบต่อเนื่อง ศึกษาการฟื้นฟุคุณภาพถ่านกัมมันต์ที่หมดประสิทธิภาพการใช้งาน ในขั้นตอนการศึกษาความสามารถในการดูดซับไอออนทองแดงบนถ่านกัมมันต์ทั้ง 4 ชนิด พบว่าค่าความเป็นกรดเบสที่เหมาะสมในการดูดซับไอออนทองแดงสำหรับ ถ่านกัมมันต์ A คือ ค่าความเป็นกรดเบสเท่ากับ 4 และสำหรับถ่านกัมมันต์ B C และ D มีค่าความเป็นกรดเบสที่เหมาะสม เท่ากับ 5 ถ่านกัมมันต์ ที่มีความสามารถในการดูดซับไอออนทองแดงสูงที่สุดคือ ถ่านกัมมันต์ A รองลงมาเป็นถ่านกัมมันต์ B C และ D ตามลำดับ การทดลองแบบต่อเนื่องได้เลือกใช้ถ่านกัมมันต์ A บรรจุลงในถังดูดซับเพื่อทดสอบประสิทธิภาพการดูดซับไอออนทองแดงพบว่า ถังดูดซับแบบแบ่งส่วนมีระยะเวลาการใช้งานนานกว่า และสามารถกำจัดไอออนทองแดงได้ดีกว่าถังดูดซับแบบคอลัมน์ และเมื่อเปรียบเทียบระหว่างน้ำเสียสังเคราะห์ กับน้ำเสียจากโรงงานอุตสาหกรรมพบว่า ถ่านกัมมันต์ A สามารถดูดซับไอออนทองแดงที่อยู่ในน้ำเสียจากโรงงานอุตสาหกรรม ได้มากกว่าไอออนทองแดงที่อยู่ในน้ำเสียสังเคราะห์ ถ่านกัมมันต์ A ที่ใช้ในการดูดซับไอออนทองแดงออกจากน้ำเสียงสังเคราะห์ สามารถนำมาฟื้นฟูคุณภาพแล้วกลับมรใช้ใหม่ได้ 2 ครั้ง หลังจากนั้นก็จะหมดประสิทธิภาพในการดูดซับอย่างถาวร ขั้นตอนการแยกไอออนทองแดงออกจากสารละลายกรดไนตริก ที่ได้จากการฟื้นฟูคุณภาพถ่านกัมมันต์พบว่า สามารถแยกไอออนทองแดงได้มากกว่า 90%
บทคัดย่อ (EN): To study the adsorption of copper ion from synthesis and industrial wastewater using 4 types of commercial coconut shell activated carbon, namely AC A, AC B, AC C AND AC D. The first experiment involved an effect of each factor on copper adsorption in batch mode. These factors were pH, contacted time and activated carbon dosage for adsorption isotherm The second one dealed with a performance of activated carbon in packed bed continuous mode. The third one considered regeneration of exhausted activated carbon to find out a life time of that activated carbon. Adsorption of copper depended on contacted time and pH of the metal solution. Maximum removal of copper by adsorption on AC A was at pH 4 while the maximum copper ion adsorption on AC B, AC C and AC D was at pH 5. From Freundlich adsorption isotherm, it was found that AC A was more effective than AC B, AC, C and AC D. In continuous mode, AC A was packing in wither horizontal or vertical packed-bet column. The result showed that horizontal packed-bed column gave more effective than vertical column. An amount of copper ion in industrial wastewater was more adsorbed on AC A than that in synthesis wastewater. In regeneration section, exhausted AC A could adsorb copper ion for 2 life-cycles after being regenerated by nitric solution. More than 90%, copper ion in eluted solution was recovered by electrochemical technique
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): th
เอกสารแนบ: http://thailis-db.car.chula.ac.th/CU_DC/Thesis/March2006_1/Kannika.pdf
เผยแพร่โดย: จุฬาลงกรณ์มหาวิทยาลัย
คำสำคัญ: คาร์บอนกัมมันต์
เจ้าของลิขสิทธิ์: จุฬาลงกรณ์มหาวิทยาลัย
รายละเอียด: To study the adsorption of copper ion from synthesis and industrial wastewater using 4 types of commercial coconut shell activated carbon, namely AC A, AC B, AC C AND AC D. The first experiment involved an effect of each factor on copper adsorption in batch mode. These factors were pH, contacted time and activated carbon dosage for adsorption isotherm The second one dealed with a performance of activated carbon in packed bed continuous mode. The third one considered regeneration of exhausted activated carbon to find out a life time of that activated carbon. Adsorption of copper depended on contacted time and pH of the metal solution. Maximum removal of copper by adsorption on AC A was at pH 4 while the maximum copper ion adsorption on AC B, AC C and AC D was at pH 5. From Freundlich adsorption isotherm, it was found that AC A was more effective than AC B, AC, C and AC D. In continuous mode, AC A was packing in wither horizontal or vertical packed-bet column. The result showed that horizontal packed-bed column gave more effective than vertical column. An amount of copper ion in industrial wastewater was more adsorbed on AC A than that in synthesis wastewater. In regeneration section, exhausted AC A could adsorb copper ion for 2 life-cycles after being regenerated by nitric solution. More than 90%, copper ion in eluted solution was recovered by electrochemical technique
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
การขจัดไอออนทองแดงออกจากน้ำเสียโดยการดูดซับบนถ่านกัมมันต์
จุฬาลงกรณ์มหาวิทยาลัย
2547
การสังเคราะห์ซีโอไลต์จากตะกอนของระบบผลิตน้ำประปาเพื่อใช้ดูดซับปุ๋ยยูเรียและปุ๋ยแอมโมเนียมซัลเฟต การศึกษาประสิทธิภาพการกำจัดสีจากน้ำเสียโรงงานผลิตกระดาษสาด้วยกระบวนการตกตะกอนและการดูดซับด้วยถ่านกัมมันต์ การขจัดกำมะถันจากมิดเดิลดิสทิลเลตโดยการดูดซับบนโพแทสเซียมไอโอไดด์/ถ่านกัมมันต์ การพัฒนาและปรับปรุงวัสดุดูดซับราคาถูกเพื่อใช้ในการดูดซับสีย้อมรีแอคทีฟ และสีย้อมเบสิก การจำลองเครื่องลดความชื้นแบบหมุนโดยการดูดซับ ผลของความชื้นต่อการดูดซับไอระเหยสารอินทรีย์ด้วยถ่านกัมมันต์ การลดปริมาณโลหะหนักในน้ำเสียสังเคราะห์โดยการดูดซับด้วยเบนโทไนท์ ศึกษาและออกแบบระบบบำบัดฟลูออไรด์ในน้ำใต้ดินแบบทีละเท โดยวิธีการดูดซับด้วยดินเบนโทไนต์ การดูดซับสีย้อมรีแอคทีฟ และสีย้อมเบสิคโดยกากตะกอนของเสีย การใช้ไทโอยูเรียในการสกัดทองจากแร่ชาโคไพไรด์และการดูดซับทองไทโอยูเรีย โดยใช้ Chlorella vulgaris และแกลบ
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก