สืบค้นงานวิจัย
Effect of sintering additives on barium cerate based solid oxide electrolysis cell for syngas production from carbon dioxide and steam
Likhittaphon S. - ไม่ระบุหน่วยงาน
ชื่อเรื่อง (EN): Effect of sintering additives on barium cerate based solid oxide electrolysis cell for syngas production from carbon dioxide and steam
ผู้แต่ง / หัวหน้าโครงการ (EN): Likhittaphon S.
บทคัดย่อ (EN): The effect of sintering additives (NiO, Co2O3, and ZnO) on the performance of barium-cerate-based solid oxide electrolysis cell (SOEC) is investigated. The performance of the SOEC with different sintering additives is determined in terms of relative density, electrochemical performance, and catalytic activity toward reverse water gas shift reaction. BaCeO3 (BC) and BaCe0.9Gd0.1O3−δ (BCG) are synthesized using conventional precipitation method, comparing to ultrasonic-assisted precipitation. The sintering additives promote both densification and grain growth. The relative density of the BCG without sintering additive is 69% while that of the BCG with 1 wt% of Co2O3, NiO and ZnO is 95%, 95% and 88%, respectively. The SEM images indicate that the BCG with sintering additives exhibits dense grains with relatively large grain size. Although the BGC with NiO and Co2O3 exhibit maximum relative density, the sample with ZnO shows relatively highest conductivity with the lowest activation energy of conduction and the sample with NiO provides the largest CO yield and CO2 conversion. The activation energy of conduction is found to be 375.41, 70.06, 66.86 and 61.80 kJ mol−1 for BCG, BCG with 1 wt% Co2O3, NiO and ZnO, respectively. The BCG with 1 wt% NiO provides the highest CO2 conversion and CO yield at temperature below 700 °C (62% CO2 conversion and 32% CO yield at 700 °C). Temperature program of oxidation (TPO) reveals that carbon deposition can cause the low CO yield at the operating temperature above 700 °C. © 2017
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): en
เอกสารแนบ (EN): https://www.scopus.com/inward/record.uri?eid=2-s2.0-85044387389&doi=10.1016%2fj.fuproc.2018.01.019&partnerID=40&md5=cccf53242e95990b9bf84ea74e932e68
เผยแพร่โดย (EN): มหาวิทยาลัยมหิดล
คำสำคัญ (EN): Barium compounds
เจ้าของลิขสิทธิ์ (EN): มหาวิทยาลัยมหิดล
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
Effect of sintering additives on barium cerate based solid oxide electrolysis cell for syngas production from carbon dioxide and steam
Likhittaphon S.
มหาวิทยาลัยมหิดล
ไม่ระบุวันที่เผยแพร่
Effect of strontium and zirconium doped barium cerate on the performance of proton ceramic electrolyser cell for syngas production from carbon dioxide and steam Low-temperature preparation of BaCeO3 through ultrasonic-assisted precipitation for application in solid oxide electrolysis cell Modelling of a tubular solid oxide fuel cell with different designs of indirect internal reformer Tree-ring stable carbon isotope-based June–September maximum temperature reconstruction since AD 1788, north-west Thailand Biophotolysis-based hydrogen and lipid production by oleaginous microalgae using crude glycerol as exogenous carbon source Effect of CuO/ZnO catalyst preparation condition on alcohol-assisted methanol synthesis from carbon dioxide and hydrogen The current trends in the green syntheses of titanium oxide nanoparticles and their applications Partial nitrification in entrapped-cell-based reactors with two different cell-to-matrix ratios: performance, microenvironment, and microbial community Effect of sugarcane bagasse treatment on gas production and ruminal degradability byusing in vitro gas production technique Reducing carbon emissions from soybean cultivation to oil production in Thailand
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก