สืบค้นงานวิจัย
การดูดซับสีย้อมรีแอคทีฟ และสีย้อมเบสิคโดยกากตะกอนของเสีย
ชนิสา หงอสุวรรณ - มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี
ชื่อเรื่อง: การดูดซับสีย้อมรีแอคทีฟ และสีย้อมเบสิคโดยกากตะกอนของเสีย
ชื่อเรื่อง (EN): Adsorption of Basic Dye and Reactive Dye by Waste Sludge
ผู้แต่ง / หัวหน้าโครงการ: ชนิสา หงอสุวรรณ
ผู้แต่ง / หัวหน้าโครงการ (EN): Chanisa Ngowsuwan
บทคัดย่อ: การศึกษาวิจัยนี้ศึกษาประสิทธิภาพในการดูดซับสีย้อมเบสิค และสีย้อมรีแอคทีฟ โดยใช้ตะกอนของเสียจากโรงกรองน้ำ และตะกอนผสมของโรงกรองน้ำกับโรงงานกระดาษมาเป็นวัสดุดูดซับ โดยปรับปรุงพื้นผิววัสดุดูดซับด้วยสารไคโตซานเปรียบเทียบกับวัสดุดูดซับที่ไม่เคลือบ โดยใช้อัตราส่วนของสาร ไคโตซานต่อกรดอะซิติกเท่ากับ 0.5:1, 1:1 และ 1.5:1 (น้ำหนัก : ปริมาตร) จากภาพถ่ายกล้องจุลทรรศน์อิเล็กตรอนแบบส่องกราด พบว่ามีสารไคโตซานติดอยู่บนพื้นผิววัสดุดูดซับเพิ่มขึ้นเมื่ออัตราส่วนของสารไคโตซานมากขึ้น ผลการศึกษาหมู่ฟังก์ชันของวัสดุดูดซับ พบว่ามีหมู่ฟังก์ชันเอมีนซึ่งมาจากวัสดุดูดซับ และสารไคโตซานที่เคลือบบนพื้นที่ผิว ผลการศึกษาบีอีทีไอโซเทอม พบว่าวัสดุดูดซับทั้ง 2 ชนิดสามารถดูดซับได้ทั้งแบบชั้นเดียว และแบบหลายชั้น ค่าpHsol และpHzpc ของวัสดุดูดซับจากตะกอนโรงกรองน้ำมีค่า pHsolมากกว่า pHzpc เล็กน้อย ส่วนวัสดุดูดซับจากตะกอนผสมเป็นไปในแนวทางกลับกัน ผลการศึกษาไอโซเทอมการดูดซับ พบว่าสามารถอธิบายได้ทั้งแบบจำลองของแลงเมียร์ และฟรุนดลิช โดยวัสดุดูดซับทั้ง 2 ชนิดทั้งเคลือบ และไม่เคลือบสารไคโตซาน มีความสามารถในการดูดซับสีย้อมเบสิคได้ไม่แตกต่างกัน ในขณะที่วัสดุดูดซับจากตะกอนโรงกรองน้ำที่ไม่เคลือบผิวด้วยสารไคโตซานสามารถดูดซับสีย้อม รีแอคทีฟความเข้มข้น 40 มิลลิกรัม/ลิตร ได้น้อยกว่าร้อยละ 20 เมื่อใช้ปริมาณวัสดุดูดซับ 200 กรัม/ลิตร เมื่อเคลือบสารไคโตซานความสามารถในการดูดซับสีรีแอคทีฟเพิ่มขึ้นเมื่ออัตราส่วนการเคลือบสูงขึ้น
บทคัดย่อ (EN): This study tries to use adsorbents made from water supply sludge (WS) and mixed sludge of water supply and paper industrial sludge (MIX). The uncoated and coated chitosan adsorbents were studied to adsorb the Basic Red 14 (BR14) and Reactive Red 141 (RR141) in the solutions. The chitosan flakes were homogenized in acetic acid by varying chitosan: acetic acid ratio of 0.5:1, 1:1 and 1.5:1 (w/v) to make chitosan gel solutions. The result from SEM micrographs revealed that chitosan could coat on adsorbent and the thickness of chitosan increased as the ratio chitosan increased. The FTIR-spectrums showed amine functional group for both uncoated and coated chitosan adsorbents. The BET isotherms of 2 type adsorbents showed that the adsorption mechanism followed the monolayer and multilayer adsorptions. Results from the values of pH of solution (pHsol) and the pH of zero point of charge (pHzpc) found that WS adsorbent has pHsol little greater than pHzpc and the MIX adsorbent has pHsol little lesser than pHzpc. The adsorption isotherms showed that adsorption of dyes followed both Langmuir and Freundlich models. Adsorption of BR14 by two adsorbents was not different whether uncoated or coated chitosan. Uncoated WS adsorbent could adsorb 40 mg/L of RR141 less than 20% when the amounts 200 g/L of adsorbent were used but the adsorption capacity increased as the ratio of chitosan increased for both adsorbents.
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): th
เอกสารแนบ: http://dcms.thailis.or.th/dcms/dccheck.php?Int_code=54&RecId=9230&obj_id=26641
เผยแพร่โดย: มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี
คำสำคัญ: สีย้อมรีแอคทีฟ
คำสำคัญ (EN): Reactive Dye
เจ้าของลิขสิทธิ์: มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี
รายละเอียด: This study tries to use adsorbents made from water supply sludge (WS) and mixed sludge of water supply and paper industrial sludge (MIX). The uncoated and coated chitosan adsorbents were studied to adsorb the Basic Red 14 (BR14) and Reactive Red 141 (RR141) in the solutions. The chitosan flakes were homogenized in acetic acid by varying chitosan: acetic acid ratio of 0.5:1, 1:1 and 1.5:1 (w/v) to make chitosan gel solutions. The result from SEM micrographs revealed that chitosan could coat on adsorbent and the thickness of chitosan increased as the ratio chitosan increased. The FTIR-spectrums showed amine functional group for both uncoated and coated chitosan adsorbents. The BET isotherms of 2 type adsorbents showed that the adsorption mechanism followed the monolayer and multilayer adsorptions. Results from the values of pH of solution (pHsol) and the pH of zero point of charge (pHzpc) found that WS adsorbent has pHsol little greater than pHzpc and the MIX adsorbent has pHsol little lesser than pHzpc. The adsorption isotherms showed that adsorption of dyes followed both Langmuir and Freundlich models. Adsorption of BR14 by two adsorbents was not different whether uncoated or coated chitosan. Uncoated WS adsorbent could adsorb 40 mg/L of RR141 less than 20% when the amounts 200 g/L of adsorbent were used but the adsorption capacity increased as the ratio of chitosan increased for both adsorbents.
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
การดูดซับสีย้อมรีแอคทีฟ และสีย้อมเบสิคโดยกากตะกอนของเสีย
มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี
2548
การพัฒนาและปรับปรุงวัสดุดูดซับราคาถูกเพื่อใช้ในการดูดซับสีย้อมรีแอคทีฟ และสีย้อมเบสิก การดูดซับสีย้อมเบสิกและสีย้อมรีแอคทีฟโดยใช้เคโอลินเคลือบด้วยไคโตซาน การทดสอบความเป็นพิษของสีย้อมโดยใช้สาหร่ายและไรแดง การสกัดสีจากกะหล่ำปลีสีแดงเพื่อใช้เป็นสีย้อมสไลด์ การบำบัดสีในน้ำสีรีแอกทีฟจากโรงงานฟอกย้อมโดยกระบวนการไฟฟ้าเคมี การย้อมเซลล์ประสาทด้วยสีจากธรรมชาติ การบำบัดน้ำเสียจากอุตสาหกรรมผลิตสีย้อมและการย่อยสลายสีย้อมกลุ่มอะโซบางชนิดโดยจุลินทรีย์ผสม การศึกษาประสิทธิภาพการกำจัดสีจากน้ำเสียโรงงานผลิตกระดาษสาด้วยกระบวนการตกตะกอนและการดูดซับด้วยถ่านกัมมันต์ การกำจัดสีย้อมประเภทสีดิสเพอร์สจากน้ำเสียจากการฟอกย้อมสิ่งทอด้วยระบบถ่านกัมมันต์ชนิดเกล็ด-เอสบีอาร์ การศึกษาความคงทนของสีของผ้าไหมที่ย้อมด้วยสีธรรมชาติ
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก