สืบค้นงานวิจัย
อิทธิพลของความเข้มข้นของสารละลายผสมกรดอะซิติกกับโซเดียมอะซิเตต ต่อการสกัดแยกไอออนสังกะสีด้วยเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง
วีรวัฒน์ ปัตทวีคงคา - จุฬาลงกรณ์มหาวิทยาลัย
ชื่อเรื่อง: อิทธิพลของความเข้มข้นของสารละลายผสมกรดอะซิติกกับโซเดียมอะซิเตต ต่อการสกัดแยกไอออนสังกะสีด้วยเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง
ชื่อเรื่อง (EN): Influence of acetic acid-sodium acetate solution concentration on extraction of zine ions via a hollow fiber supported liquid me
ผู้แต่ง / หัวหน้าโครงการ: วีรวัฒน์ ปัตทวีคงคา
บทคัดย่อ: งานวิจัยนี้ศึกษาถึงความเข้มข้นของสารละลายผสมกรดอะซิติกกับโซเดียมอะซิเตต ซึ่งเป็นสารละลายบัฟเฟอร์ที่มีผลต่อการสกัดแยกไอออนสังกะสีด้วยเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง โดยที่เยื่อแผ่นเหลวเตรียมจากสารสกัด D2EHPA (Di-2-Ethylhexyl Phosphoric Acid) ที่มีความเข้มข้นของสารสกัดไม่เกิน 10% โดยปริมาตรในตัวทำละลาย Kerosene Jet A-1 สารป้อนเป็นสารละลายที่มีความเข้มข้นของไอออนสังกะสี 100 ppm และสารละลายสตริปเป็นสารละลายกรดซัลฟิวริกความเข้มข้น 0.1 โมลต่อลิตร ผลการศึกษาแสดงว่าความเข้มข้นของสารสกัดที่ใช้ในกระบวนการโดยไม่มีสารละลายบัฟเฟอร์จะให้ประสิทธิภาพในการสกัดสูงเมื่อความเข้มข้นเป็น 0.9% โดยปริมาตร ในกรณีที่ใช้สารละลายบัฟเฟอร์เข้าร่วมในกระบวนการ นอกจากจะช่วยให้ค่า pH ในสารป้อนคงที่แล้วยังส่งผลให้การสกัดและการนำกลับมีประสิทธิภาพดีขึ้น นอกจากนี้สารละลายบัฟเฟอร์ยังลดความเข้มข้นของสารสกัดลงจาก 0.9% เหลือ 0.5% โดยปริมาตร เมื่อใช้สัดส่วนของสารละลายบัฟเฟอร์ต่อสารป้อนที่เหมาะสมเท่ากับ 1:50 เมื่อพิจารณาถึงผลของอัตราการไหลที่ใช้ในกระบวนการพบว่าขณะที่อัตราการไหลสูงขึ้นประสิทธิภาพในการสกัดและการนำกลับจะลดต่ำลง จากการศึกษาวิจัยพบว่าอัตราการไหลที่เหมาะสมของระบบจะเท่ากับ 100 มิลลิลิตรต่อนาที
บทคัดย่อ (EN): This research studied the concentration of a mixture of acetic acid and sodium acetate solution which was a buffer solution affecting the extraction of zinc ions via a hollow fiber supported liquid membrane. The liquid membrane was prepared by diluting D2EHPA (Di-2-Ethylhexyl Phosphoric Acid) extractant in Kerosene Jet A-1 with a concentration less than 10% by volume. The feed solution was an aqueous of 100 ppm zinc ions, and the stripping solution was a sulfuric acid solution of 0.1 mole/liter. The result showed that extractant concentration in the process without any buffer solution obtained high efficiency when the concentration is 0.9% by volume. When the buffer solution is used in the process, it provided not only constant pH value of feed solution but also higher efficiencies of the extraction and the stripping. Moreover, the buffer solution could reduce extractant concentration from 0.9% to 0.5% by volume through an appropriate ratio of buffer solution to feed solution of 1:50. For an effect of flow rate in the process, it was shown that as the flow rate increased, the efficiency of extraction and stripping decreased. From the results, it was found that an appropriate flow rate of the system was equal to 100 ml/min.
บทคัดย่อ: ไม่พบข้อมูลจากหน่วยงานต้นทาง
ภาษา (EN): th
เผยแพร่โดย: จุฬาลงกรณ์มหาวิทยาลัย
คำสำคัญ: ไอออนโลหะ
เจ้าของลิขสิทธิ์: จุฬาลงกรณ์มหาวิทยาลัย
รายละเอียด: This research studied the concentration of a mixture of acetic acid and sodium acetate solution which was a buffer solution affecting the extraction of zinc ions via a hollow fiber supported liquid membrane. The liquid membrane was prepared by diluting D2EHPA (Di-2-Ethylhexyl Phosphoric Acid) extractant in Kerosene Jet A-1 with a concentration less than 10% by volume. The feed solution was an aqueous of 100 ppm zinc ions, and the stripping solution was a sulfuric acid solution of 0.1 mole/liter. The result showed that extractant concentration in the process without any buffer solution obtained high efficiency when the concentration is 0.9% by volume. When the buffer solution is used in the process, it provided not only constant pH value of feed solution but also higher efficiencies of the extraction and the stripping. Moreover, the buffer solution could reduce extractant concentration from 0.9% to 0.5% by volume through an appropriate ratio of buffer solution to feed solution of 1:50. For an effect of flow rate in the process, it was shown that as the flow rate increased, the efficiency of extraction and stripping decreased. From the results, it was found that an appropriate flow rate of the system was equal to 100 ml/min.
หากไม่พบเอกสารฉบับเต็ม (Full Text) โปรดติดต่อหน่วยงานเจ้าของข้อมูล

การอ้างอิง


TARR Wordcloud:
อิทธิพลของความเข้มข้นของสารละลายผสมกรดอะซิติกกับโซเดียมอะซิเตต ต่อการสกัดแยกไอออนสังกะสีด้วยเยื่อแผ่นเหลวที่พยุงด้วยเส้นใยกลวง
จุฬาลงกรณ์มหาวิทยาลัย
2541
ผลของไอออนโลหะหนักต่อการเจริญของสาหร่าย ผลของอุณหภูมิต่อพิษเฉียบพลันของแคดเมียม สังกะสี และสารละลายผสมร่วมในลูกปลานิล (Oreochromis niloticus Linnaeus) การผลิตน้ำตาลซอร์โบสด้วยแบคทีเรียอะซิติกทนร้อน ผลร่วมของกรดอะซิติกกับอุณหภูมิต่อการยับยั้งการเจริญของ Salmonella Anatum และปฏิกิริยาสีน้ำตาลเนื่องจากเอนไซม์ในกะหล่ำปลีหั่นฝอย ผลของกรด 3,5,6-ไทร์คลอโร-2-ไพรีดิลออกซีอะซิติกและกลูโคสต่อการเติบโตและคุณภาพผลของส้มโอพันธุ์ทองดี ผลของความเข้มแสงและความเป็นกรด-เบสต่อการเจริญของ Spirulina platensis และ Chlorella vulgaris การปั่นเส้นใยนาโนแบบแกนร่วมด้วยไฟฟ้าสถิติจากเซลลูโลสแอซีเทตเพื่อผลิตฟิล์มเส้นใยกลวงบรรจุอะม็อกซิซิลินและลักษณะการปลดปล่อยสารแ ผลของเบนซิลอะดีนินและเนฟทาลีนอะซิติคแอซิคต่ออายุการปักแจกันของดอกกล้วยไม้ Dendrobium Walter Oumae 4N ผลของระดับการกำจัดหมู่อะซิติลและน้ำหนักโมเลกุลของไคโตซานต่อการลดของแข็งแขวนลอยของน้ำทิ้งจากกระบวนการผลิตเต้าหู้แข็ง การแยกและคัดเลือกเชื้อราประเภทไวท์รอทที่มีความสามารถในการย่อยสลายสารประกอบอะโรมาติกไฮโดรคาร์บอน
คัดลอก URL
กระทู้ของฉัน
ผลการสืบค้นทั้งหมด โพสต์     เรียงลำดับจาก